Digging for Razor Clams

April 24, 2015 (Updated May 12, 2015)
Advertisements

Oregon’s beaches are popular year round destinations for many reasons, but in Clatsop County there’s a famous sandy stretch that turns into clam heaven for  thousands of people who show up to dig their suppers from the sea.

As springtime moves into high gear, the best low tides of the season bring a bounty of seafood close at hand. Local resident Steve Fick likes to say, “When the tide goes out, the dinner table is set…with razor clams!”

Fick grew up in Astoria and he really digs this recreation. “There are clams galore this season – one of the best, most plentiful clam ‘sets’ in recent history. The biologists say the harvest could exceed one million clams.”

That much is certain, but if you’ve never dug this sport – how do you get started? Fick handed me a “clam gun,” the tool of choice for beginners learning the ropes of clam digging.

It’s a hard plastic tube with a covered top that has a handle built into it and a small hole on the top so that the tube acts like a siphon. You press the tube or “gun” down into the soft sand up to three feet deep, and then place your thumb over the hole, lift and pull the tube full of sand – and hopefully, the razor clam – back up to the surface.

“Try that clam hole right there, Grant,” noted Fick, pointing to a small, quarter-sized dimple in the sandy surface. “The clam’s neck is just under that dimple. It’s a giveaway sign that there’s a clam down there. Go for it!”

And so I did – the tube easily slid down its length, I covered the hole and lifted the heavy tube full of sand that held a dandy four-inch long razor clam. It was easy! In fact, so easy that anyone can do it!

Commercial clam digging is also the best it’s been in years. At Bell Buoy Seafood in Seaside, Jon Hartill said his workers clean and vacuum-pack more than 800 pounds of razor clams each week during a season stretching from April through July.

He added that the hand-work techniques for cleaning and processing the clams hasn’t changed in decades. “This is a pretty old traditional way of doing it – all by hand and nothing fancy here,” noted Hartill.  “60 percent of our clams go to restaurants; they want a consistent size so that’s usually 11 or 12 clams to the pound.”

Bell Buoy Seafood also sells fresh clams to the public as fast as they are placed in the cooler. In fact, the store is the only Oregon processor of fresh razor clams. “I think there is a huge demand for razor clams – especially in Portland,” said Hartill. “I think people taste these Oregon clams that are so sweet tasting that it immediately takes them to the beach. It’s kind of neat that way.”

Each spring, more than 800,000 razor clams are harvested off 18 miles of shoreline between Seaside and the Columbia River. Oregon Department of Fish and Wildlife’s Matt Hunter is a Shellfish Biologist who monitors the size, age and quality of the daily commercial clam catch. Hunter said that Mother Nature delivered a record amount of razor clams to the Oregon Coast this year. “We could see a record season! The ocean currents were right and the productivity of the ocean was right so we got this tremendous set of clams on our beaches. Plus, we had a mild winter and they all survived. People will have no problem digging razor clams this year.”

Back on the beach – near the Peter Iredale Shipwreck at Ft. Stevens State Park, Paul Watt said that one man’s recreation is actually his “research.”

“I love coming out here on a minus low tide to dig on the sand bars that are revealed – it’s really good clamming when that happens.” Watt doesn’t mind wading knee deep through chilly saltwater so he can try out his latest “clam gun” model that takes the strain out of the sport. You see, Watt designs and builds the popular tools that many folks use to catch their supper from the sea.

Paul Watt is a structural engineer by education and a welder by trade, but the life-long “coastie” has earned a nickname over the past three decades: “King of the Clam Guns” for the innovative clam guns that he creates.

Inside his Bay City welding shop, he cuts out the parts, shapes the tubes and attaches the handles, but he doesn’t use plastic or aluminum – rather, Watt prefers stainless steel. “The stainless is very thin and yet it’s strong enough to stand up to the pushing and pulling through thick sand. Plus, it’s really a slick metal so it goes into the sand easier.”

Diggers have long complained that clam gun sand vacuum slows them down and leads to sore backs as they struggle to lift the sand-filled guns – Watt said, “not anymore!” He’s even built a child’s model, so youngsters like Ryan Mizzee can easily dig a limit too.

If you decide to go: know that a shellfish license is required, you must dig your own clams and must keep the first 15 in your own container.

And what to do with those daily limits of delicious razor clams? “We broil ‘em in the oven. Put a little breading on each and the flavor stays —just five minutes or less under the broiler and they are perfect,” Watt says. His recipe is absolutely delicious and provides a fine way to round out the day’s adventure.

You should know that good clamming tides are slated for May and June, so if you choose to go, check your tide table and plan your visit at least two hours before the low tide.

Oregon Department of Fish and Wildlife manages the clam resource and there are important rules and regulations to note:

  •  A state shellfish license is required for clam diggers fourteen and older.
  •  Each clam digger must dig their own limit of 15 razor clams and you cannot put any back.
  •  Remember: even if you break a shell or dig a small clam, the first 15 that you dig you must keep.
  •  You can purchase Paull Watt’s clam guns directly from his shop, Watt Welding (9815 9th St, Bay City, (503) 377-2225.) and from Englund Marine and Industrial Supply.

About The
Author

Grant McOmie
Grant McOmie is a Pacific Northwest broadcast journalist, teacher and author who writes and produces stories and special programs about the people, places, outdoor activities and environmental issues of the Pacific Northwest. A fifth generation Oregon native, Grant’s roots run deepest in the central Oregon region near Prineville and Redmond where his family continues to live.

Featured in this story